Disclaimer

This blog is for entertainment purposes only, and is not meant to teach you how to build anything. The author is not responsible for any accident, injury, or loss that occurs as a result of reading this blog. Read this blog at your own risk.

Tuesday, September 25, 2012

Ch. 6 - Fuselage assembly - Part 5


Taping the rear seat (2.3 hrs)  

Yesterday I floxed the rear seat to the back of the fuselage. Today I taped the back side of the rear seat.


Fresh flox to ease the BID tape transition

More fresh flox on the top side 

BID tape ready with centerline marked

BID tape in position

Plastic backing sheet removed

Same thing, top side.

BID tape with peel-ply on the edges

One thing I had not thought about, was how little room there is between the small gear tab and the back seat. 

There was just no way to get any BID tape in such a small gap, so I just left that alone.

Next, I will glass the front side, and at last the rear seat will be done.


No comments:

Post a Comment