Taping the front seat (3.3 hrs)
Today the front seat was taped to the left sidewall, and the rear seat was floxed in place.
 |
| Flox in sandwich bag, ready for dispensing |
 |
| Initial flox application. Tongue depressor was later used to smooth and radius the corner |
 |
| BID tape being prepped |
 |
| Bid tape ready |
 |
| BID tape in place, with back plastic being removed. |
 |
| Peel-ply added to edges of BID tape |
 |
| Flox added to the rear seat/gear buildup juncture, and rear seat screwed back in place |
 |
| Clamps added to even the pressure on the seat edges, while the flox cure |
Overall, today’s tasks were pretty simple. With these two bulkheads locked in place, the fuselage should finally stop squirming around on me every time I touch it, and working on the remaining ones will be less stressful.
Looking great Marco. Mike
ReplyDelete