Disclaimer

This blog is for entertainment purposes only, and is not meant to teach you how to build anything. The author is not responsible for any accident, injury, or loss that occurs as a result of reading this blog. Read this blog at your own risk.

N977JT page

  1. My first solo in a Long EZ
  2. Wade's first flight in my Long EZ
  3. Rough River 2016 - Best RR ever!
  4. Electrical/Avionics - Part 1 - Panel upgrade
  5. Electrical/Avionics - Part 2 - Panel choice
  6. Electrical/Avionics - Part 3 - Panel  design 
  7. Electrical/Avionics - Part 4 - Face plate
  8. Electrical/Avionics - Part 5 - Back plate (aka Junction Box)
  9. Electrical/Avionics - Part 6 - General wiring and the junction box/plate
  10. Electrical/Avionics - Part 7 - "Press to test" circuit for the annunciator light
  11. Electrical/Avionics - Part 8 - Panel #2 changes
  12. Electrical/Avionics - Part 9 - Cutting into the plane and panel #3
  13. Electrical/Avionics - Part 10 - "Git her done!"
  14. Electrical/Avionics - Part 11 - Random thoughts on my GRT Mini/Garmin GNS-480 installation
  15. Electrical/Avionics - Part 12 - Roll servo installation
  16. Oil cooler fan - part #1 - Putting "experiment" back into Experimental Aviation
  17. Oil cooler fan - part #2 - Shroud build up
  18. Oil cooler fan - part #3 - Ground testing
  19. Oil cooler fan - part #4 - Fan flight testing
  20. Electrical/Avionics - Part 13 - Pitch servo installation
  21. Electrical/Avionics - Part 14 - Pitch servo flight test
  22. Electrical/Avionics - Part 15 - George is flying!
  23. 360ยบ video
  24. Covers/Fairings/Consoles - Map pocket
  25. Cleveland wheel's main bearing race replacement - Fabricating a bearing race removal/installation tool 
  26. Instrument panel #4
  27. Electrical/Avionics - Part 16 - Passenger’s USB outlet
  28. Electrical/Avionics - Part 17 - Exterior lighting
  29. Electrical/Avionics - Part 18 - Interior lighting
  30. Covers/Fairings/Consoles - Oil door repair
  31. Sun & Fun 2019 - Escaping the cold
  32. JT's miscellaneous updates #1 - Small items that make a difference
  33. Electrical/Avionics - Part 19 - ADS-B... OUT
  34. Electrical/Avionics - Part 20 - Emergency Locator Transmitter
  35. Nose-wheel main bearing race replacement
  36. Two small batteries or one big one?
  37. JT's improvements continue
  38. Electrical/Avionics - Part 21 - Panel #5 design
  39. Moving a LongEZ fuselage... solo.
  40. 3D printing to the rescue
  41. Electrical/Avionics - Part 22 - Panel #5 Faceplate
  42. Electrical/Avionics - Part 23 - Deslumpifier, wiring, and more
  43. Electrical/Avionics - Part 24 - Oil pressure indications
  44. Aileron woes
  45. JT’s miscellaneous updates #2
  46. JT's miscellaneous updates #3 - Landing Light
  47. JT's miscellaneous updates #4 - Relief tubes 
  48. JT’s miscellaneous updates #5 - Passenger's Handle 
  49. JT’s miscellaneous updates #6 - Reversed Wing Bolts 
  50. Top Overhaul
  51. Fuel Injection #1 - A problem long in the tooth
  52. Fuel Injection #2 - Where to begin
  53. Fuel Injection #3 - Engine removal
  54. Fuel Injection #4 - Automotive to Aviation engine-stand conversion 
  55. Fuel Injection #5 - Fuel selector valve and gascolator
  56. Fuel Injection #6 - Fuel system, tanks to firewall
  57. Fuel Injection #7 - Engine monitor

No comments:

Post a Comment